 |
 |
Tube Devices Therapy |
 |
Tube Devices Therapy |
Photo: The original Rife Beam Ray device, built nearly 80 years ago. Though cumbersome and clumsy to use, it was able to cure cancer and a host of other diseases. The frequency devices built and used by Dr. Rife did not require patients to be "hooked up" to the device as do the modern "pad" machines described in the preceding chapter. But the equipment Rife built was designed for an earlier era, and new developments in electronics permit sleek, new designs better able to work with the frequencies available today. The model featured below, similar to the one I own, is a remarkable precision-built unit, meticulously produced one at a time by Dave Trebing at VibrntHealth.com . It is known as a Rife/Bare device, licensed to a few select manufacturers by Dr. James Bare, who holds US and International patents on the updated design of the original Rife instrument. |
Photo: Trebing's Rife Plasma Tube device. As new as tomorrow. What I like so much about the modern tube units is that the person receiving treatment does not have to be connected or "attached" to the unit at all. You do, however, have to be located within a few feet of the tube, but you are otherwise free to move about and use your hands, rather than be stuck holding electrodes. If you are sharp, you'll notice the plasma tube device shown here is driven by an Antlier-Robin F-100 series stand-alone generator. This automatically tells you this system is more sophisticated and expensive than the simple stand-alone generator approach we discussed in the chapter on Pad Units. If you are electronically adept, go to RifeTechnologies.com, Dr. Bare's site, He offers, at modest cost, a manual he wrote which contains the schematic and directions on how to build your own device with readily available parts. Here, however, let me just give you my personal feelings: I run treatments on myself while working at my computer, and I want my hands free, not holding electrodes. I also prefer to treat myself while I sleep, running longer, more comprehensive programs through the night. Unfortunately, when I sleep, I thrash around a lot. Before I bought my Rife/Bare unit, I used a pad device, and would wake up in the morning to find I had torn the wires loose during the night, thus getting little or no treatment. Using a tube unit, placed on the night table a foot or so from my bed, eliminated that problem. I suspect the treatment is"deeper" or more penetrating when delivered by light waves than by direct electrical current. There is controversy about this concept, too, and in all honestly, I have to admit I don't understand the technical details. When I took a course in electronics, I did poorly, and barely got by. It is enough for me to know I just feel better results when I use the light wave approach. But let's get back to the costs for a moment, because the Rife/Bare and similar quality instruments can run into thousands of dollars. In the chapter on audio devices I mentioned Ken Uzzel's site in Australia, Heal-me.com.au At his site, he features an imaginative set-up he has developed using very inexpensive components to put together a passable tube unit running off his FREX software, using your own computer as a generator to drive the system. Will his plasma ball do what a machine like the Rife/Bare Plasma Tube can do? I would think not, and my Rife/Bare device is one of my main workhorses. But what the plasma ball unit lacks in power and sophistication it more than makes up for in its small expense. It provides you with a great opportunity to be able to actually begin using frequency therapy. I have had limited clinical use with Uzzell's devices, but when I do use them, they are successful. In addition, Ken is an earnest person who truly wants to see as many people as possible get better health using frequency medicine without having to break their piggy banks to buy equipment. I applaud his motives and support his work. Finally, I must mention one other set-up I use with increasing appreciation for its design, flexibility, and the dedication to support and ongoing research by the manufacturer, Michael Tigchelaar and his development team at TrueRife.com Mike's unit can act as a pad device, using one of the F-100 series generators with specially designed software. It can also be used as a tube device, with a number of different glass tubes designed to perform multiple tasks. Advanced plasma technology and special "grounding" units allow you to apply TrueRife tube directly to the skin, like a pad unit, thus simultaneously combining the best of both treatment types.
Tigchelaar also produces regular updates on the frequencies he and his researchers use, and these are available for download from his web site at no charge. They are readily incorporated into any of the F-100 series generators whether purchased from TrueRife or not. Finally, I must mention there are a large number of TrueRife units in use throughout the alternative medical community. The larger experience is invaluable to all of us because shared knowledge grows faster than knowledge that is closely held by only a few individuals. I especially appreciate his genuine willingness to share. |
|||
